How To Fix The Arms of Oakley Cathode Eyeglasses?

How To Fix The Arms of Oakley Cathode Eyeglasses?

Oakley cathode eyeglasses are a popular style of glasses that many people wear. However, the arms of these glasses can sometimes become loose and need to be fixed. There are a few easy steps that you can follow to set the components of your Oakley Cathode eyeglasses. First, you will need to locate the screws that hold the arms in place. These are usually located on the inside of the arms near the hinges with the lens width. Once you have found the screws, use a screwdriver to tighten them.

 If the screws are too tight, you may need to use a pair of pliers to loosen them.

Once the screws are tightened, you should check to ensure that the arms are secure by gently trying to wiggle them. If they appear to be secure, then you have successfully fixed the arms of your Oakley cathode eyeglasses.

How To Tell if the Arm of Your Oakley Cathode Eyeglasses is Broken or Not?

If you've ever owned a pair of Oakley cathode eyeglasses, you know they're incredibly sturdy and well-made. But sometimes, even the most well-made products can break. So how can you tell if the arm of your Oakley cathode eyeglasses is broken or not?

There are a few things to look for:

  1. Check to see if the arm is straight. If it's bent, then it's probably broken.

  2. Look for any cracks or breaks in the arm. If you see any, then it's likely that the arm is indeed broken.

  3. Try to move the arm back and forth.

If it's difficult to move or feels loose, then it's probably broken.

If you're still not sure, then you can always take your Oakley cathode eyeglasses to a local optometrist or Oakley dealer and have them take a look. They'll be able to tell you definitively whether or not the arm is broken and advise you on what to do next. In most cases, if the component is broken, you'll need to purchase a new pair of Oakley cathode eyeglasses.

What To Do if The Arms of Your Oakley OX3233 Breaks?

If the arms of your Oakley OX3233 glasses break, there are a few things you can do to try and fix them. First, check to see if the arms are still intact at the hinge. If they are, you may be able to reattach them easily. However, if the components are broken at the hinge, you'll need to replace the entire arm. Fortunately, Oakley sells replacement arms for the OX3233 model. Remove the old arm and snap on the new one. If you're having difficulty, you can always take your glasses to an Oakley retailer or authorized repair center for assistance.

What Are The Most Common Causes of Broken Arms on Oakley OX3233?

There are a few common causes of broken arms on Oakley ox3233 glasses. One is simply dropping the glasses and having them land on a hard surface. Another is sitting or lying on them, causing them to bend and break. Sometimes, the arms can break simply from being too tight—if they're constantly being flexed in the same spot, eventually, they'll snap.

And finally, Oakley ox3233 arms can break from repeated exposure to sunlight or other heat sources; this causes the metal to expand and ultimately fail. No matter how it happens, a broken arm on your Oakleys is always a bummer. But thankfully, it's usually a relatively easy fix. Just take them to your local Oakley dealer or authorized repair center, and they'll take care of it for you.

How To Prevent My Oakley Oakley OX3233 Eyeglasses From Breaking?

As anyone who has owned a pair of Oakleys knows, they are not cheap. And while they may be worth the investment, no one wants to replace their glasses yearly because they keep breaking. So, how can you prevent your Oakleys from breaking? 

Here are a few tips: 

1. Be careful when putting them on and taking them off. Don't just yank them off your head; take the time to remove them carefully, so you don't stress the frames. 

2. Don't leave them in direct sunlight. The heat can warp the frames and make them more susceptible to breaking. 

3. Don't store them in your car. Again, the heat can damage the frames and make them more likely to break. 

4. Be careful when cleaning them. Don't use harsh chemicals or scrub too hard—this can damage the frames. Just use a soft cloth and mild soap to clean them gently. 

5. Inspect the frames regularly for cracks or other signs of wear and tear. If you see any damage, take them to an Oakley dealer or certified repair center to have them fixed before they break entirely. 

Are There Any DIY Methods For Repairing OX3233 Cathode Arms?

While many professional restoration services are available for antique and vintage radios, several do-it-yourself methods can be used to repair ox3233 cathode arms to achieve precise optical alignment. One popular way is to use a soldering iron to attach the new wire to the broken arm. This can be done by stripping the insulation from the end of the wire, then soldering it to the exposed metal of the arm. Another standard method uses a conductive adhesive such as epoxy or silver paint.

This can be applied directly to the broken arm; the new wire can be connected to it. Whichever method you choose, be sure not to damage any other radio parts while performing the repair. With a little bit of patience and care, ox3233 cathode arms can be easily repaired at home.

How Much Does it Cost To Fix Cathode Oakley?

The cost of cathode ray tube repair can vary depending on the severity of the damage. In most cases, cathode Oakley replacement is the best option with progressive lenses. This typically involves replacing the entire cathode ray tube, which costs between $100 and $200. However, if only the anode is damaged, it may be possible to repair it for a much lower cost. An anode replacement typically costs between $30 and $50 and more for frame purchase with the best price guarantee.

Finally, if the cathode itself is damaged, it may also need to be replaced. A cathode replacement typically costs between $20 and $40. Ultimately, the best way to determine the cost of cathode ray tube repair is to consult with a qualified technician with a price match guarantee.

What Can I Do To Make Sure My Oakley Cathode Glasses Last Longer?

One way to ensure your Oakley cathode glasses last longer is to take care of them. When you're not wearing them, store them in the included case. This will help to prevent scratches and other damage. The case will also keep the lenses clean. If you get scratches on the lenses, you can try using a lens cleaner and a soft cloth to buff them. In addition, be careful when cleaning the glasses themselves. Only use a soft, lint-free cloth.

Avoid harsh chemicals or abrasive materials that can damage the lenses or coatings. With proper care, your Oakley cathode glasses and Oakley frames should last many years.

How To Make Sure Oakley Cathode OX3233 Is Real?

If you're looking for a stylish and high-quality pair of Oakley glasses, Oakley Cathode OX3233 glasses are a great option. However, with so many fake Oakleys on the market, you must ensure you're getting the real deal. Here are a few tips for ensuring that your Cathode OX3233 sunglasses are the real thing:

  • Check the Oakley Cathode logo on the single vision lenses. The Oakley logo should be etched onto the lens, not printed. If the Oakley logo is printed, the glasses are likely fake.

  • Examine the frame closely. Look for any irregularities in the shape or size of the frame. Also, ensure all the screws are in place and evenly spaced. Fake Oakleys often have crooked or missing screws.

  • Make sure that the lenses are of optical quality for the prescription glasses. Fake Oakleys often have poor-quality lenses that warp your vision.

By following these tips, you can be confident that your Cathode OX3233 glasses are the real deal. Enjoy your new glasses knowing that you got a great deal on quality Oakley eyeglasses with prescription lenses.


Oakley cathode eyeglasses have a unique design that many people love and for those using contact lenses. However, some people find that the arms of the glasses are too tight and uncomfortable. If you are one of these people, there is no need to worry about prescription eyeglasses. There is an easy way to fix this problem. All you need is a pair of scissors and a few minutes of your time. Follow these simple steps to improve the arms of your Oakley cathode eyeglasses as prescription eyewear.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.