How To Replace Ray Ban Wayfarer ii Lenses?

How To Replace Ray Ban Wayfarer ii Lenses?

Replacing the lenses on your Ray Ban Wayfarer II sunglasses with model code rb2185 is a straightforward process. All you need is a lens replacement kit, which can be purchased at most eyeglass stores or online. The ray ban care kit will include all the tools you need to remove the old lenses and replace them with new ones.
To replace the lenses, you'll first need to remove the screws from the frame of the sunglasses. Once the screws are removed, you can remove the old lenses and replace them with new ones. Be sure to line up the new lenses correctly before putting the screws back in place and tightening them up. 


How To Order The Right Lenses?

When ordering the right Ray-Ban sunglasses lenses, it is important to consider the shape of your face and the size of your head. Oval or round faces look good in most lens shapes, but people with square or rectangular faces should steer clear of aviator-style lenses. Additionally, larger heads require larger lenses, while smaller heads can wear smaller frames without looking too small. Once you've determined the best style for you, consider the color. Lenses come in various colors, including black, brown, green, and blue. Brown and green lenses are perfect for everyday wear, while blue and black lenses are better suited for special occasions or evening wear. Finally, choose a lens type that fits your needs. 

Ray-ban Wayfarer ii classic gloss has eighteen color adapt-to-light lenses designed with Bronze heritage in mind to ensure an unmatched level of clarity and comfort with no compromises for any lighting condition - indoors or outdoors, day or night minute matters!

How to Easily Remove and Install Replacement Lenses?

The easiest way to remove replacement lenses is to use a pair of needle-nose pliers. First, grasp the edge of one side of the lens on the hinge closest to you with your pliers and apply pressure, pulling up on it gently for an additional grip. Then, with your other hand, slide your thumbnail around under the opposite side of the lens. As you pull up with pliers, slide the nail under the opposite edge of the lens until you can pop it off successfully. Now that this one wing is off, repeat step 1 with the opposite side's hinge wing - continue alternating wings until replaceable lenses are removed from the frame completely.
The ray ban wayfarer ii washed evolve a great product for anyone who needs to replace their lenses. It comes with a lens removal tool and an installation kit, so you can easily switch out your old lenses for new ones in just a few minutes! 

How To Remove Old Lenses?

There are a few ways to remove old lenses. One is to use a lens removal tool, a small metal cylinder with a sharp edge on one end. Another way to remove lenses is by using heat. You can either use a heat gun or put the glasses in the oven on low heat. Be very careful when using heat to damage the frames or lenses. A third way to remove lenses is by using Goo Gone or another type of adhesive remover. Put some of the removers on a cloth and rub them over the lenses until they come off. Be very careful not to get any of the removers on the frames.
One of the most common reasons people get new glasses is because they have an old lens that needs to be replaced. The ray-ban wayfarer ii polarized lenses are specifically designed for those with ray ban prescription lenses and can provide you with optimal vision. So when it comes time for your next eye exam, make sure you ask about upgrading your lenses so that you don't have to go through this process again!

How To Insert New Lenses?

The first step is to wash and dry your hands thoroughly. Next, ease the glasses off your eyepiece and look over the nose pads. Once you see the crease, to slide them out, use both thumbs together and pull across that area until they pop out. Place new lenses over inner frames and push into place by pressing down with thumbs on top of the lens for an even tighter fit, then slip back onto the nose bridge and rest spectacle arms on the face. It's important not to be too forceful when installing lenses as they can bend or break if forced or not handled correctly during this process.
One of the most important aspects of ray ban rb2132 wayfarer sunglasses is lens care and maintenance. It's important to know how to insert new lenses to prolong their lifespan and maintain your vision. 



How To Clean Your Lenses?

There are a few ways to clean your lenses. For ray ban wayfarer sunglasses, you can use a gentle lens cleaner or a mixture of warm water and soap. Ensure to avoid any harsh chemicals or solvents when cleaning your lenses, as they can damage the surface and optical quality of the lenses.
To clean your lenses, start by wetting them with warm water and adding a small amount of mild soap or detergent. Next, gently rub the lenses in a circular motion to remove dirt or debris. Next, rinse the lenses thoroughly with warm water to remove all soap and debris. Finally, dry your lenses with a soft cloth before storing them in their case.

How To Adjust Ray Ban Wayfarer Sunglasses?

The adjustment of your Ray-ban RB2132 Wayfarer Sunglasses is easy with these few steps. For optimal comfort and performance, the most important thing to do is follow the shape of your nose when adjusting them because the shape makes all the difference in how they sit on your face. Then, all you have to do is gently bend the arms to one side or other and pivot them so that they fit your nose snugly. With this, you should be able to see both clear and blurred horizon lines while wearing it. You would also need a gentle bending outward at both ends of the temples if that isn't happening automatically because people tend not to blink while looking through sunglasses. 

Can You Replace The Arms on Ray Ban Wayfarer?

Yes, you can replace the arms on Ray-Ban rb2185 Wayfarer sunglasses. However, it is important to note that not all Ray-Ban Wayfarer sunglasses have removable arms. Therefore, it is important to verify whether or not your sunglasses have removable arms before attempting to replace them.
If your sunglasses do have removable arms, the process of replacing them is relatively simple. First, remove the old arms by gently twisting them until they come loose. Then, attach the new arms by aligning the groove on the arm with the hinge on the frame and twisting until they are tight. Finally, check to make sure that the arms are secure and rotate smoothly.

How To Fix The Arms of Your Ray Ban Wayfarer?

There is no one definitive way to fix the arms of your Ray-Ban Wayfarer Sunglasses. Depending on the severity of the damage, you may be able to fix it with a little bit of superglue or you may need to take it to an optical shop and have them do a more permanent repair. If the arms are bent too far out of shape, they may not be fixed without causing further damage. In that case, you'll need to purchase a new pair of sunglasses.


The Ray-Ban Wayfarer is one of the most popular sunglasses on the market today. This article has provided you with an overview of how to replace lenses, order replacement lenses, remove old lenses and insert new ones, and clean your lens for optimum performance. Whether it's replacing or cleaning your Ray-Bans, we hope this information helps! 


Back to blog

Leave a comment

Please note, comments need to be approved before they are published.